How to Reset Tapo Camera: The Ultimate Guide for Troubleshooting

How to Reset Tapo Camera? To reset your Tapo Camera, locate the reset button on the device and press and hold it for about 5 seconds until you hear a beep sound, indicating that the camera has been successfully reset.

Troubleshooting Tapo Camera Reset Issues

Having trouble resetting your Tapo Camera? Don’t worry, we’ve got you covered. In this post, we’ll address common issues faced during the Tapo camera reset process and provide you with some useful tips to ensure a successful reset.

One of the reasons behind Tapo camera not resetting properly could be due to incorrect button presses or a malfunctioning reset button. Make sure to follow the correct reset procedure as mentioned in the camera’s user manual. If the reset button is not responding, try using a different tool, such as a paperclip or a pin, to press the button.

To ensure a successful reset, it’s important to ensure that the camera is connected to a stable power source and has a strong Wi-Fi signal. Check the power adapter and the Wi-Fi settings on your camera to ensure everything is functioning properly.

If you’re still facing issues, you may consider performing a factory reset on your Tapo camera. This will reset all the settings on the camera and allow you to start afresh. Again, refer to the user manual for the exact steps to perform a factory reset.

Remember, troubleshooting Tapo camera reset issues may require some trial and error, so be patient and follow the instructions carefully. Hopefully, these tips will help you reset your Tapo camera successfully and get it back up and running in no time.

See Also:

Resetting Tapo Camera: Step-by-step Guide

Step 1: Locating the reset button on the Tapo camera
To reset your Tapo camera, you first need to locate the reset button. The button is usually located on the bottom or back of the camera.

It can be a pinhole button that requires a small tool like a paperclip to press, or a larger button that can be pressed with your finger. Take a close look at your camera to find the reset button.

Step 2: Understanding the different reset options available
Before performing a reset, it’s important to understand the different reset options available. Tapo cameras typically offer three reset options: soft reset, hard reset, and factory reset.

A soft reset will reboot the camera without changing any settings, while a hard reset will restore the camera to its default settings. A factory reset, on the other hand, will erase all settings and configurations, returning the camera to its original state.

Step 3: Performing a soft reset on Tapo camera
To perform a soft reset on your Tapo camera, locate the reset button and press it for about 10 seconds.

The camera will restart, and any temporary issues or glitches should be resolved. It’s a simple troubleshooting step that can often fix minor problems without affecting your camera’s settings or configurations.

Step 4: Performing a hard reset on Tapo camera
If a soft reset doesn’t solve the issue, you can try a hard reset. Press and hold the reset button for about 30 seconds, and then release it.

The camera will restart and restore its default settings. Keep in mind that all custom settings and configurations will be lost, so make sure to take note of any important settings before proceeding with a hard reset.

Step 5: Factory resetting the Tapo camera
If you want to completely reset your Tapo camera to its original state, you can perform a factory reset.

To do this, locate the reset button and press and hold it for about 10 seconds. The camera will reboot and reset all settings and configurations to their default values.

This is useful if you want to start fresh with your camera or if you’re experiencing persistent issues that cannot be resolved with a soft or hard reset.

Step 6: Troubleshooting tips for unsuccessful resets
If your reset attempts are unsuccessful and the camera is still not functioning properly, there are a few troubleshooting tips you can try.

First, make sure you’re pressing the reset button correctly and holding it for the recommended duration. Double-check that you’re pressing the correct button and not accidentally pressing any other buttons.

If the camera still doesn’t reset, you may need to contact the manufacturer’s support for further assistance.

Overcoming Common Tapo Camera Reset Issues

Resetting the Tapo camera can sometimes come with its own set of issues that you may encounter. One common problem is when the camera does not respond after being reset.

In this case, you can try a power cycle by disconnecting the camera from the power source and then reconnecting it.

Another issue you might face is the camera not connecting to a new Wi-Fi network after the reset. To troubleshoot this, you can go to the device settings and select “Wi-Fi Settings” to choose the new network.

If you notice a blinking red light on the camera after resetting it, this could indicate a problem with the connection. You can try power cycling, checking the Wi-Fi settings, or contacting customer support for further assistance.

In some cases, the Tapo camera may auto-reboot after being reset. This could be a firmware issue, so it’s recommended to check for any available updates and install them.

Lastly, if the default password is not working after the reset, you can try using the default username and password combination provided by the manufacturer. If that still doesn’t work, you may need to contact customer support for help.

How to Reset Tapo Camera: The Ultimate Guide for Troubleshooting


Frequently Asked Questions On How To Reset Tapo Camera

How Do I Reset My Tapo Security Camera?

To reset your Tapo security camera, follow these steps:

1. Locate the reset button on the camera.

2. Press and hold the reset button for about 10 seconds.

3. Release the button once the camera’s LED light starts blinking rapidly.

4. The camera will then be reset to its factory default settings.

5. You can now set it up again and connect it to your desired network.

How Do I Connect My Tapo Camera To A New Wi-fi Network?

To connect your Tapo camera to a new Wi-Fi network, follow these steps:

1. Select the camera you want to connect in the Tapo app.

2. Tap on the settings icon and go to “Device Settings”.

3. Scroll down and select “Wi-Fi Settings”.

4. Tap on “Wi-Fi Network” and choose the new network you want to connect to.

That’s it! Your Tapo camera will now be connected to the new Wi-Fi network.

How Do I Get My Tapo Camera Back Online?

To get your Tapo camera back online, follow these steps:

1. Reset the camera by pressing the reset button.

2. Go to the Tapo camera settings on your device.

3. Select “Device Settings” and scroll down to “Wi-Fi Settings”.

4. Choose the new Wi-Fi network you want to connect to.

5. Wait for the camera to reconnect to the new network.

For more information, visit the TP-Link website or watch tutorials on YouTube. Avoid Tapo camera issues like default password, auto reboot, not working, or blinking red by following troubleshooting guides.

How Do I Factory Reset My Cameras?

To factory reset your cameras, follow these steps:

1. Locate the reset button on your Tapo camera.

2. Press and hold the reset button for about 10 seconds until the camera’s LED light starts blinking rapidly.

3. Release the reset button and wait for the camera to restart.

4. Once the camera restarts, it will be restored to its original factory settings.

Note: Make sure to backup any important data before performing a factory reset.


Resetting your Tapo camera is a simple and effective way to troubleshoot any issues you may be facing. By following the proper steps, you can restore your camera to its original factory settings and start fresh.

Whether you’re experiencing connectivity problems or need to change your Wi-Fi network, a reset can solve many common problems.

Just remember to press and hold the reset button for a few seconds until you see the LED indicator blink red. Once you’ve successfully reset your Tapo camera, you can reconfigure it according to your preferences. Happy monitoring!

Leave a Comment