If your Feit Floodlight Camera is offline or the blue indicator light is flashing, it is likely due to a power loss or moving your smartphone outside the camera’s Wi-Fi range. To troubleshoot, ensure the camera is connected to power and press the reset button until you see a blinking blue LED and hear a tone.
Adjusting your network settings may also resolve any offline issues.
Credit: m.youtube.com
Lost Power Or Network Connectivity
If your Feit Floodlight Camera is offline, it could be due to power loss or network connectivity issues. To troubleshoot, check if the camera is connected to power and reset it by holding the reset button until you see a blinking blue LED.
Additionally, make sure that your smartphone is within the camera’s Wi-Fi receiver’s range.
Troubleshooting Connection Issues
If your Feit Floodlight Camera is offline, it could be due to network settings issues or a power outage. To troubleshoot, check your network settings and ensure you have internet access. If necessary, reset the camera using the reset button.
Ensuring network connectivity
- Check network settings: If your Feit floodlight camera is showing as offline, it could be due to network settings issues. Check and modify your network settings.
- Powering on the camera: Ensure your Smart Flood Light Camera is connected to power.
Resetting The Smart Flood Light Camera
- Check Network Settings: If your Feit floodlight camera is showing as offline, it could be due to network settings issues. Ensure the camera is connected to the power source and verify your network settings.
- Resetting the Smart Flood Light Camera:
- Locating the reset button: Behind the cover on the side of the camera, you will find a reset button.
- Pressing and holding the reset button: Keep pressing and holding the reset button until you see a blinking blue LED and hear an audible tone.
- Going into pairing mode: After the reset, the camera will enter pairing mode and is ready to be connected to your smartphone or network.
- Recognizing blinking blue LED and audible tone: The blinking blue LED and audible tone indicate that the camera is in pairing mode.
To get your Feit Floodlight camera back online, follow these steps: check network settings, reset the camera, and ensure it is in pairing mode. Troubleshooting connectivity issues will help resolve any offline or disconnection problems you may encounter.
Blinking Leds On The Smart Flood Light Camera
If you have successfully installed your Smart Flood Light before but it is disconnecting or offline, it is most likely because it lost power or had network connection issues.
The camera may also go offline if your smartphone is moved outside the camera’s Wi-Fi receiver’s range. To troubleshoot this issue, ensure that your Smart Flood Light Camera is connected to power and press the Reset Button located behind the cover on the side of the camera to reset it.
Hold the reset button until you see a blinking blue LED and hear an audible tone. The blinking blue LED indicates that the camera has completed boot up and is ready to pair. On the other hand, a solid red LED indicates network connection issues.
In case your Floodlight Camera stops recording after connecting it to your Wi-Fi, follow the steps below to resolve the issue. If your Feit floodlight camera is showing as offline, it could be due to network settings issues.
Check and modify your network settings to ensure proper connectivity. If the camera still goes offline, it could be due to a power surge, power outage, loose wire in your router setup, or changes in your Wi-Fi network password or router.
Restart your internet access and reboot the camera to get it back online as soon as possible. If further troubleshooting is required, refer to the Feit Electric app or user manual for detailed instructions.
Smart Flood Light Camera Not Recording
Feit Floodlight Camera Offline? If your smart floodlight camera is disconnecting or offline, it may be due to a loss of power or a change in the Wi-Fi receiver’s range. Troubleshoot by checking power connection and resetting the camera for pairing mode.
| Feit Floodlight Camera Offline – Troubleshooting Tips |
| If your Feit floodlight camera is showing as offline, it could be due to network settings issues. Checking and modifying your network settings can help get your camera back online. Additionally, the camera may go offline if it loses power or if your smartphone is outside the camera’s Wi-Fi receiver’s range. |
| Resolving Wi-Fi connectivity issues |
| To troubleshoot Wi-Fi connectivity issues with your Feit floodlight camera, ensure that the camera is properly connected to power. If the camera is connected but still offline, you can press and hold the reset button located behind the cover on the side of the camera to reset it and put it into pairing mode. This can help resolve connectivity issues and get your camera back online. |
| Ensuring proper camera setup |
| If you have recently installed your Smart Flood Light camera, ensure that it is set up correctly. Follow the steps provided by Feit Electric to properly install and connect your camera to your Wi-Fi network. This can help avoid any potential setup issues that may cause your camera to go offline and not record. |
Flood Light Not Operating As Expected With Motion
| Troubleshooting steps for unexpected behavior: |
| 1. Adjust motion sensitivity settings: Make sure the sensitivity settings of your Feit floodlight camera are properly configured. Lowering or increasing the sensitivity level can help in preventing false motion triggers or ensuring that desired motion is detected. |
| 2. Check for obstructions or interference: Ensure that there are no physical obstructions, such as plants, branches, or objects, blocking the view of the floodlight camera. Also, check for any potential interference from other Wi-Fi devices or networks that could affect the camera’s performance. |
If your Feit floodlight camera continues to exhibit unexpected behavior despite following these troubleshooting steps, it is recommended to consult the Feit Electric app or contact Feit Electric for further assistance.
Checking Network Settings
If your Feit Floodlight Camera is showing as offline, it could be due to possible network settings issues. To check and modify your network settings, follow these steps:
- Ensure that the camera is properly connected to power.
- Press and hold the reset button located behind the cover on the side of the camera until you see a blinking blue LED and hear an audible tone. This will reset the camera and put it into pairing mode.
- Make sure that your smartphone is within the camera’s Wi-Fi receiver’s range. If your smartphone is outside the range, the camera may go offline.
- If you have recently changed your Wi-Fi network password or router, make sure to update the camera’s settings accordingly.
- If troubleshooting steps don’t resolve the issue, check for any power surges or outages that may have affected the camera’s connectivity.
By following these steps, you can troubleshoot and resolve network settings issues that may be causing your Feit Floodlight Camera to go offline.
Feit Floodlight Camera Offline And Getting It Back Online
If you have successfully installed your Smart Flood Light before but it is
disconnecting or offline, it most likely because it lost power or is unable to
sync with the cloud servers. Additionally, the camera will go offline if you
move your smartphone outside the camera’s Wi-Fi receiver’s range. To resolve
this issue, ensure that the camera is connected to power and press the Reset
Button located behind the cover on the side of the camera for a few seconds
until you see a blinking blue LED and hear an audible tone. If the issue persists,
check your network settings as it could be due to network configuration problems.
Lastly, power surges, power outages, or changes in your Wi-Fi network password or
router can also cause the camera to go offline. In such cases, follow the appropriate
troubleshooting steps provided by Feit Electric or the manufacturer to get the Floodlight
Camera back online.
Restoring The Feit Floodlight Camera Online
If your Feit Floodlight Camera is offline, there are a few troubleshooting steps you can take. First, check your network settings to ensure there are no issues there. If that doesn’t work, try resetting the camera by pressing and holding the reset button until you see a blinking blue LED.
Finally, make sure you have a stable internet connection and reboot your device.
to bring the Feit Floodlight Camera back online, follow these steps:
1. Troubleshooting network connectivity:
– Check your network settings to ensure that the camera is connected to the right Wi-Fi network.
– Verify that your internet connection is stable and working properly.
– Make sure there are no obstacles or interferences that may disrupt the Wi-Fi signal.
2. Rebooting the camera:
– Locate the reset button behind the cover on the side of the camera.
– Press and hold the reset button until you see a blinking blue LED and hear an audible tone.
– Wait for the camera to complete the reboot process.
If the camera still remains offline after following these steps, it may be helpful to check for any software updates or contact Feit Electric customer support for further assistance. Remember to always ensure a reliable power source for the camera and maintain a strong Wi-Fi connection for optimal performance.
Common Reasons For Floodlight Camera Offline
If your Feit Floodlight Camera is offline, it may be due to a power loss, moving your smartphone out of the camera’s Wi-Fi range, or network settings issues. To resolve the issue, ensure the camera is connected to power, reset the camera, or check and modify your network settings.
| Reasons for Floodlight Camera Offline |
| Possible causes of offline status |
|
| If your Feit Floodlight Camera is showing as offline, it could be due to network settings issues. Checking and modifying your network settings may help bring the camera back online. Additionally, a power surge or outage might have caused the camera to disconnect. Another possible reason could be a loose wire in the router setup. Make sure to double-check your Wi-Fi network password or if any changes have been made to your router. These steps can help troubleshoot and resolve the offline status of your Floodlight Camera. |
Frequently Asked Questions For Feit Floodlight Camera Offline
How Do I Get My Feit Floodlight Camera Back Online?
To get your Feit Floodlight camera back online, follow these steps:
1. Ensure the camera is connected to power.
2. Press and hold the reset button behind the camera’s cover until you see a blinking blue LED and hear a tone.
3. Check if your smartphone is within the camera’s Wi-Fi receiver range.
4. If the camera is still offline, troubleshoot network settings or reboot your internet connection.
5. Contact Feit Electric support if the issue persists.
Why Is My Floodlight Offline?
If your Floodlight is offline, it may be due to a power outage, loose router setup wire, or a change in your WiFi network password. To troubleshoot, ensure power is connected, check router setup, and reset the Floodlight’s pairing mode.
Rebooting and verifying internet access can also help resolve the issue.
Why Does My Feit Security Camera Keep Going Offline?
If your Feit security camera keeps going offline, it could be due to power loss or weak Wi-Fi signal. Make sure the camera is connected to power and within range of the Wi-Fi receiver. If the issue persists, try resetting the camera by pressing the reset button.
How Do I Reset My Feit Flood Light Camera?
To reset your Feit flood light camera, follow these steps:
1. Ensure the camera is connected to power.
2. Locate the reset button behind the cover on the side of the camera.
3. Press and hold the reset button until you see a blinking blue LED and hear a tone.
4. The camera will then go into pairing mode.
Conclusion
If your Feit Floodlight Camera is offline, there are a few troubleshooting tips you can try.
First, make sure it is connected to power and press the reset button to enter pairing mode.
If you’ve moved your smartphone outside the camera’s Wi-Fi range, it may also go offline.
Check your network settings and ensure a stable internet connection. In case of power surges or changes in your router setup, the camera may disconnect.
By following these steps, you can get your Feit Floodlight Camera back online and functioning properly again.