To connect Blink Sync Module to WiFi, tap “Discover Device” when the lights blink blue and green, then enter your WiFi password and tap “Join.” Once the devices finish communicating, you’ll receive a confirmation message.
If your Sync Module is not connecting to your WiFi network, try resetting it by pressing and holding the reset button.
Additionally, you can update the WiFi settings for your Sync Module by joining the temporary WiFi network and entering your WiFi password.
Note that the Blink system requires WiFi, and future releases may offer the capability to connect the Sync Module directly to the router using an Ethernet port.
Discovering And Joining The Sync Module’s Temporary Wi-fi Network
When the lights match a blinking blue and solid green pattern, tap Discover Device when prompted to join the Sync Module’s temporary Wi-Fi network.
Tap Join, and then select your Wi-Fi network. Enter your Wi-Fi password and tap Join.
If the Sync Module is not connecting to your Wi-Fi network, or if you see a Sync Module Offline message and the issue does not resolve itself in a few minutes, reset your Sync Module.
From the Device Settings screen, select General Settings > Change Wi-Fi. On the Change Wi-Fi screen, follow the instructions to “Press and release the reset button on the camera until red and blue lights flash. When ready, the lights will display: Blinking Blue, Steady Green.”
Troubleshooting Sync Module Connection Issues
How to Connect Blink Sync Module to Wifi
Having trouble connecting your Blink Sync Module to your Wi-Fi network? Follow these troubleshooting steps to resolve any connection issues:
- Press and hold the reset button of the sync module.
- Wait for the flashing red light and then release the reset button.
- If your Sync Module is offline, tap Join on the Blink app and enter your Wi-Fi password to reconnect it.
- If you’re setting up the Sync Module for the first time, tap Discover Device when prompted to join the Sync Module’s temporary Wi-Fi network.
- Tap Join, and then select your Wi-Fi network. Enter your Wi-Fi password and tap Join.
- After the devices have finished communicating, you’ll receive a message confirming that the Sync Module has been added to your system.
- If you’re still experiencing issues, you can try resetting your Sync Module by pressing the reset button.
By following these troubleshooting steps, you should be able to successfully connect your Blink Sync Module to your Wi-Fi network and enjoy the benefits of a connected home security system.
Reconnecting Blink Camera To Wi-fi
Here are the steps to reconnect your Blink camera to Wi-Fi:
- When the lights on the Sync Module match a blinking blue and solid green pattern, tap “Discover Device” when prompted to join the Sync Module’s temporary Wi-Fi network.
- Tap “Join,” and then select your Wi-Fi network.
- Enter your Wi-Fi password and tap “Join.”
- After joining is successful, you’ll be asked to join your local Wi-Fi network. Enter the Wi-Fi password and tap “Join.”
If you’re experiencing issues with the Blink sync module connection, you can try the following:
- Press and hold the reset button of the Sync Module. Wait for the flashing red light, then release the reset button.
- If the Sync Module is still not connecting to your Wi-Fi network or shows an offline message, you can reset the Sync Module by pressing the reset button. This will place the Sync Module back in setup mode.
- To update the Wi-Fi settings for your Sync Module system, go to the Blink app, tap the top right “+ icon,” select “Sync Module,” and follow the instructions.
Remember, your Blink sync module and cameras require Wi-Fi for internet connectivity. While future releases may enable the capability to wire the Sync Module directly to your router, for now, they need to connect to Wi-Fi.
Credit: storables.com
Frequently Asked Questions On How To Connect Blink Sync Module To Wifi
Why Won’t My Blink Sync Module Connect To My Wi-fi?
If your Blink sync module is not connecting to your Wi-Fi network, you can try resetting the module. Press and hold the reset button until you see a flashing red light, then release it. Wait for the blinking blue light and try connecting again.
If the issue persists, you may need to troubleshoot further or contact Blink support for assistance.
How Do I Connect My Blink To Sync Module?
To connect your Blink to the sync module, follow these steps: 1. When the lights on the sync module blink in a blue and green pattern, tap “Discover Device. ” 2. Join the sync module’s temporary Wi-Fi network. 3. Select your Wi-Fi network, enter the password, and tap “Join.
” 4. After successfully joining, you’ll be prompted to join your local Wi-Fi network. 5. Enter the Wi-Fi password and tap “Join. ” Your sync module is now connected to Wi-Fi. Note: If there are any issues, you can reset the sync module and try again.
How Do I Connect My Blink To A New Wi-fi?
To connect your Blink to a new Wi-Fi, follow these steps: 1. Wait for the Blink Sync Module lights to show a blinking blue and solid green pattern. 2. Tap “Discover Device” when prompted to join the Sync Module’s temporary Wi-Fi network.
3. Tap “Join” and select your Wi-Fi network. 4. Enter your Wi-Fi password and tap “Join. ” 5. After the devices finish communicating, you’ll receive a message confirming the Sync Module’s connection to your Wi-Fi network.
Does Blink Sync Module Have To Be Plugged Into Router?
No, the Blink sync module does not have to be plugged into the router. The Sync Module and cameras connect to WiFi for an internet connection. Ethernet port connection may be available in future releases.
Conclusion
To successfully connect your Blink Sync Module to WiFi, follow these steps: tap “Discover Device” when your Sync Module’s lights are blinking blue and solid green.
Select your WiFi network, enter the password, and tap “Join. ” After the devices have finished communicating, you’ll receive a confirmation message.
If you encounter any issues, you can troubleshoot by resetting the Sync Module or updating its WiFi settings.
Remember, the Blink system requires WiFi for both the Sync Module and cameras, ensuring a stable internet connection for optimal performance.